Drilling, doweling & anchoring in Syracuse, NY
VALOR Development LLC provides concrete drilling, doweling and anchoring across Syracuse and Central New York — setting rebar dowels and anchors in existing concrete to tie new work to old and to fasten structure and equipment.
VALOR Development LLC performs drilling, doweling and anchoring throughout Central New York and the Finger Lakes: drilling holes into existing concrete to set rebar dowels that tie new concrete to old, and anchors that fasten structure, rails and equipment.
Doweling is a small scope that carries structural load. The hole size, depth, spacing and the adhesive or anchor are specified in the drawings or by the product manufacturer, and the connection only performs if they're followed — including cleaning each hole before anything is set. VALOR drills and sets to the specification rather than to what's convenient on the day.
The work is usually part of a larger scope: a slab infill after trenching, a new slab meeting an old one, or equipment going into an existing building.
What's included
- Drilling holes in existing concrete to the specified size and depth
- Rebar dowels set to tie new concrete to existing
- Anchors set for structure and equipment
- Holes cleaned before anything is set
- Work laid out to the drawings
You probably need this if
- A new slab or wall that has to be tied into existing concrete
- An infill pour after a trench or opening has been cut
- Structure, rails or equipment that need anchoring into concrete
- Drawings that call for epoxy-set dowels or anchors
How a drilling, doweling & anchoring job runs
Lay out to the drawings
Dowel and anchor locations marked to the specified spacing.
Drill to size and depth
Holes drilled to the diameter and depth the specification calls for.
Clean the holes
Holes cleaned as the adhesive or anchor manufacturer specifies before setting.
Set and cure
Dowels and anchors set and left to cure before load or a pour goes on them.
What changes
in Central New York
Cold weather affects how adhesives cure, and Central New York has a long cold season. Curing times and minimum temperatures in the product specification get planned into the schedule rather than discovered on a January morning.
Drilling, doweling & anchoring questions
What people ask before booking drilling, doweling & anchoring work in Central New York.
What is concrete doweling used for?
Doweling sets steel reinforcing bars into holes drilled in existing concrete so new concrete can be tied to it — for slab infills, additions and new work meeting old. VALOR Development LLC drills and sets dowels in Central New York to the size, depth and spacing in the project specification.
Why do drilled holes need to be cleaned before setting dowels or anchors?
Adhesive anchors and epoxy-set dowels rely on bond to the concrete, and drilling dust left in the hole weakens that bond. VALOR Development LLC cleans each hole as the adhesive manufacturer specifies before anything is set.
Drilling, doweling & anchoring across Central New York and the Finger Lakes
Need drilling, doweling & anchoring in Central New York?
Send the project location and scope, and someone from VALOR will be in touch — and tell you straight if it isn't a job for us.
Call (844) 535-0331